cumplimos-25
FLAT PROFILE
ReferenceWidth (Aprox.)ThicknessMinimum Order
ZK805 235mm (1.6 - 2mm) -
ZK806 220mm (1.6 - 2mm) 300 Meters
ZK807 150mm (1.6 - 2mm) 300 Meters

It is a very resistant decorative protection, composed of Zikonyl ®. It has rounded ends in order to eliminate sharp edges. Anchored to the wall by neutral silicone or adhesive. The outer surface is textured and the interior smooth.
proteccion-pared-hospital clic to enlarge

In this photo you can see the horizontal protection model ZK805

wall-protector-office-hotel-corridor-bumper Click to enlarge

The model ZK805 can be used in offices

ZK805

Preparation

The walls into which the section is to be mounted should be finished and painted.

Mounting

Cut the Zikonyl ® in the necessary measures. Then make sure that both the profile on its smooth face as the wall are clean of dust and impurities, this step is vital because not be completely clean surface ZK-F will not be properly attached to the wall .
About the colors availables of the ZK-805 model, you can see in the next Link:  COLOURS



calidad

Ziko Europa S.A Polígono Industrial Aimayr C/ Bronce, 12 Nave 6, 28330 San Martín de la Vega Madrid (Spain)

Phone: +0034 916911206 Fax: +0034 916916799 info@zikonyl.com


This page is property to Ziko Europa, S.A. all rights reserved. Zikonyl ® is a registered trademark of Ziko Europa, S.A.

ZIKONYL-Ziko Europa,S.A. Protectores de paredes, cantoneras, pasamanos, tapajuntas, barandillas
cumplimos-25
FLAT PROFILE
ReferenceWidth (Aprox.)ThicknessMinimum Order
ZK805 235mm (1.6 - 2mm) -
ZK806 220mm (1.6 - 2mm) 300 Meters
ZK807 150mm (1.6 - 2mm) 300 Meters

It is a very resistant decorative protection, composed of Zikonyl ®. It has rounded ends in order to eliminate sharp edges. Anchored to the wall by neutral silicone or adhesive. The outer surface is textured and the interior smooth.
proteccion-pared-hospital clic to enlarge

In this photo you can see the horizontal protection model ZK805

wall-protector-office-hotel-corridor-bumper Click to enlarge

The model ZK805 can be used in offices

ZK805

Preparation

The walls into which the section is to be mounted should be finished and painted.

Mounting

Cut the Zikonyl ® to the necessary measures. Next, make sure that both the profile on its smooth face and the wall are clean of dust and impurities, this step is of vital importance, because if the surface is not completely clean, the flat profile will not be properly adhered to the wall..
About the colors availables of the ZK-805 model, you can see in the next Link:  COLOURS



calidad

Ziko Europa S.A Polígono Industrial Aimayr C/ Bronce, 12 Nave 6, 28330 San Martín de la Vega Madrid (Spain)

Phone: +0034 916911206 Fax: +0034 916916799 info@zikonyl.com


This page is property to Ziko Europa, S.A. all rights reserved. Zikonyl ® is a registered trademark of Ziko Europa, S.A.