Vertical Corner Protector

ZK-S Corner Protector

Corner protector made of aluminum and Zikonyl®, designed to absorb impacts on hallway corners. Textured surface that conceals scratches over time. Made in Madrid.

🔥 BS1d0 ✔ Get back into shape Cut to size 🇪🇸 Own manufacturing
Width
50 mm
Max length
6 meters
Material
Aluminio + Zikonyl®
Certification
BS1d0 / EN 13501-1
+ 35 years of experience
7 days Standard delivery time
50 mm Corner width
2 years Manufacturing warranty

Product description

The ZK-S is a vertical corner protector made of a structural aluminum profile coated with Zikonyl®, our BS1d0 certified low-smoke material. Its robust design makes it particularly suitable for corridor corners in hospitals, care homes, and public buildings with heavy traffic of beds and wheelchairs.

One of the most outstanding features of the ZK-S is its textured front surface: thanks to this finish, everyday scratches are naturally concealed, maintaining its aesthetic appearance for years without the need for additional maintenance.

The aluminum is fixed to the wall using wall plugs and screws, or with neutral silicone if the wall requires it. The end caps are reversible (suitable for both sides) and are installed before clipping on the Zikonyl® profile. The Zikonyl® profile is supplied 2 mm longer than the aluminum for a perfect fit.

If a skirting board is present, only the top cap is installed. If there is no skirting board, two caps (top and bottom) are installed to prevent the Zikonyl® from slipping. Minimum installation measurement: 40 mm.

Main features

  • Certification BS1d0 Complies with the BS1d0 fire reaction standard, mandatory in hospitals, care homes and public buildings.
  • 🛡️
    Robust, impact-resistant design The profile is designed to absorb the impacts of beds, wheelchairs and carts without damaging the corner of the wall or the profile itself.
  • It regains its shape After the impact, the material recovers its original dimensions, maintaining the aesthetic appearance of the corridor.
  • Phthalate and Bisphenol A free Non-toxic material. Complies with RoHS Directive 2011/65/EU. Suitable for healthcare environments with frequent contact.
  • European regulatory compliance It complies with European construction and accessibility regulations for public spaces.
  • More than 10 colors in stock Large stock of each color available for immediate delivery. We also manufacture custom colors.
  • Assembly instructions We provide free assembly instructions to all our customers.

Sketch and dimensions

Cross-section and dimensions of the ZK-s plane profile

Installation sketch of the ZK-S corner piece with measurements and dimensions

ZK-S Parts Breakdown

Structural aluminum profile, Zikonyl® coating, and reversible end caps for installation with or without a skirting board.

Installation sketch of the ZK-S corner piece with measurements and anchors

Installation diagram

Recommended spacing between fixings: 400–600 mm. Anchors should never be directly opposite each other to avoid weakening the wall.

Step-by-step installation

01

Preparing the wall:

Walls must be finished and painted before installation. No prior reinforcement is required.

02

Aluminum cutting and drilling

Cut and drill the two aluminum profiles to the required dimensions. Spacing between fixings: 400–600 mm per piece.

03

Place the end-caps

If there is a baseboard: only install the top cover.

If there is no baseboard: install both the top and bottom covers.

Mount the covers onto the aluminum before attaching it to the wall.

04

Clip the Zikonyl®

Screw the aluminum profile to the wall and then clip on the Zikonyl® cladding, which is 2 mm longer for a perfect fit.

ZK-S Colors

More than 10 colors in stock with delivery in 7 days. We also manufacture your custom color.

Natural linen · 1
Chlorophyll Green · 2
Carbon Gray · 3
Amber Yellow · 4
Orange Pumpkin · 5
Fog White · 6
Sky Blue · 7
Amethyst Purple · 8
Coffee Brown · 9
Smoke Gray · 10
View full color chart →